PAS 68 gates - from top UK suppliers

The PAS 68 Terra Gate is a high security automatic tracked sliding gate. The gate leaf is constructed with a Heavy Duty Crash Impact Beam and Heavy Duty posts support the gate leaf. It has been successfully impact tested with a 7.5t vehicle travelling at 50mph (80kph) which equates to 1852kJ. On impact the gate completely stopped the vehicle...

SlideGuard RCS is an impact-tested, automatic cantilever gate accredited by PAS 68 to stop a 7.5 tonne vehicle. With two versions tested to mitigate the threat of vehicles travelling at 40mph and 50mph. The gate and locking pin can either be powered electronically or by a hydraulic motor depending on the site requirements. Both maintain a smooth...

Terror Stopper Crash Rated PAS 68 cantilever sliding gates are designed to prevent a 7.5 tonne vehicle borne terrorist / ram-raid threat. They are suitable for the continuation of any high security fencing specification, powered fence or security toppings across a vulnerable entrance to a site...

Terror Stopper PAS 68 Bi-Folding Gates are high-security, hydraulically driven steel gates designed for hostile vehicle mitigation, tested to stop 7.5-tonne vehicles at 40mph and 50mph with minimal penetration and shallow foundations: high-security bi-folding gate for vehicle impact resistance; tested to PAS 68:2010 standards at 7.5T, 40mph and...

The Linebacker cable crash fence and gate system will stop a 7.5 tonne vehicle traveling at 50 mph (80km/h). It has passed BSi PAS 68:2010 for the performance of vehicle security barriers and their supporting foundations when subject to a single horizontal impact: quick to install; single unbroken cable lengths; cable supported with posts at 6m...

FoldGuard RCS is an impact-tested, automatic bi-folding gate. With three versions available, tested to mitigate the threat of vehicles travelling at 40 and 50mph. The gate and locking pin are powered by a hydraulic drive unit for consistent and controlled motion, which ensures smooth and quiet operation in both directions. Typically operating in...

The Vulcan RCS cantilever sliding gate has the widest span available in the perimeter protection market. With a 10m clear opening, the product is impact-tested to both PAS 68 and IWA 14-1. The Vulcan RCS gate will stop a 7,500kg vehicle travelling at 64kph (40mph), arresting the vehicle in just 4.5m. The design is based on SlideGuard Pro, Barkers...

The Frontier Pitts impact tested Terra Gate is available in widths of up to 6000mm and height of 4000mm It is part of the Anti Terra range, which has been successfully impact-tested in accordance with BSI PAS 68, stopping 7500kg travelling at 50mph (80kmph). The Terra Gate is ideal perimeter security for sites such as airports, banks, embassies...

The Terra Ultimate automatic drop arm barrier has been successfully impact tested against a range of different energies. Successfully impact tested to PAS 68 stopping a 7.5t vehicle travelling at 50mph (80kph) which equates to 1852kJ. On impact the barrier stopped the vehicle within the aperture. The beam was retested for with under run skirt to...

Terror Stopper PAS 68 Pedestrian Portal is a crash-rated, re-deployable pedestrian access frame made by Zaun, tested to BSI PAS 68:2010 to stop a 7.5-tonne vehicle at 40 mph with zero penetration. Designed for temporary or permanent use, it accommodates gates, turnstiles, and mesh infills, and can be used standalone or with the MultiFence PAS 68...

PAS 68 Terra V is a pair of bi-parting hinged steel security gates designed to stop a 7.5t vehicle at 50mph, with zero site penetration and full post-impact functionality. Made for perimeter protection, gates can be manual or automated, with shallow foundation requirements and a range of infill and finish options. Heights up to 5000mm and widths...

RDS Original PAS 68 is a temporary crash fence system made from fence panels and posts, designed for rapid deployment and removal without ground foundations. Crash tested to BSI PAS 68:2010, it withstands impacts from 2.5 and 7.5 tonne vehicles: temporary crash fence system for hostile vehicle mitigation; crash tested to BSI PAS 68:2010 for 2.5...

Zaun is the first company to manufacture a fully integrated vehicle mitigation fence solution. This is the world’s first product to achieve PAS68 V/2500(N1G)/48/ 90:0/0. Designed to mitigate the ever-increasing security risk on sites of critical importance, this zero penetration solution uses leading industry technologies to nullify attack by...

The CSG 10610 and 10611 are the world's first crash tested bi-folding speed gates. Designed to prevent vehicle borne terrorist threat, capable of blending seamlessly with any building or site perimeter line, enabling discreet vehicle mitigation. The drive system offers 9 second unlock and open time, 11 second close and fully lock time. These...

HiSec Super PAS 68 is a high-security fencing system from Zaun, made to integrate hostile vehicle mitigation to BSI PAS 68:2010 standards. Designed to stop a 2.5-tonne vehicle at 48 km/h, it uses a GME spring HVM system with HiSec Super 6 mesh and is installed with concrete footings for a single line of defence. Suitable for critical...

The CSG 10140 sliding cantilevered gate is designed to provide a low cost crash tested sliding gate to prevent hostile vehicle mitigation. The gate successfully passed the PAS 68:2010 test and achieved the following 3 classifications: sliding Gate – 3000mm wide x 2400mm high : V/7500[N2]/64/90:1.7/0.0; sliding Gate – 5000mm wide x 2400mm high ...

Improve the security of your access point with the automatic SlideMaster SR1 ™ cantilever gates, which offer several layers of enhanced protection over the base model SlideMaster™. The SlideMaster SR1™ automatic gate can sustain small-scale physical attacks. Dense mesh panels are difficult to cut through and provide excellent visibility for any...

SlideMaster SR2™ cantilever automatic sliding gates can improve the security of access points. They carry certification to Loss Prevention Standards 1175 Security Ratings (SR1), providing a one minute delay time to physical attackers using basic tools. When greater levels of security are needed, the SlideMaster SR2 ™ cantilever sliding gate...

Miti-Gate® is a manual PAS 68 crash tested barrier made from aluminium, designed for locations with infrequent vehicle access that require protection from vehicle-borne threats. Installed between static crash rated bollards, it uses a patented arrestor system and can be hinged, bi-parting, or fully removable: manual crash tested barrier for...

Frontier Pitts designed, manufactured and installed anti-terrorist gates and barriers to the Rumaila Oil Fields in Southern Iraq, which are estimated to contain 17 billion barrels of oil, accounting for 12% of Iraq’s oil reserves. In total 25 Terra manual arm barriers and 18 Terra sliding cantilevered gates completed the project. Both products are...

CSG 10640/50 crash tested bi-folding gates are high-security, trackless access barriers made from steel, designed to protect sites from vehicle-borne attacks. Certified to PAS 68 and IWA 14-1 standards, gates use hydraulic drive system for rapid opening and closing, and integrate discreetly with building perimeters: crash tested bi-folding...

When an embassy in the Nordics required a crash-rated cantilever gate, they chose Barkers’ Vulcan RCS PAS 68 and IWA 14-1 impact-tested gate, developed in collaboration with its sister company, ATG Access. The client required the the gate to be 3m high with palisade infill to match the existing perimeter. Due to site constraints, Barkers designed...

Frontier Pitts supplied HVM bollards and hinged swing gates for a £440m shopping centre in Oxford. With the large numbers of visitors each year, all shopping centres are classed as Crowded Place venues amd HVM protection was required for the site. All installations needed to blend in to the surrounding areas so not to deter visitors. The service...

The CSG 10840 and 10850 bollards are designed to protect infrastructure from vehicle-borne attacks. Three products available in the static bollard range; CSG 10840 – Shallow Depth Bollard Crash Tested to 40mph: PAS 68:2007 V/7500[N2]/64/90:0/17.9; CSG 10850 – Shallow Depth Bollard Crash Tested to 50mph: PAS 68:2007 V/7500[N2]/80/90:2.8/9.8; CSG...