Aquasett® permeable paving blocks can be used in conjunction with either tanked or infiltration systems. They are suitable for use on footpaths, domestic drives and roads (80mm).
The range of colours and the olden finish make Aquasett® appropriate for use in conservation areas or on projects where architectural heritage is a major consideration.
Aquasett® blocks provide drainage through vertical channels and will allow water through the surface at a rate of approximately 9000mm per hour (9000 litres per m2 per hour). The Inbitex® geotextile beneath the laying course will allow approximately 4500 litres per m2 per hour through and this figure should be used for design purposes.
The range of colours and the olden finish make Aquasett® appropriate for use in conservation areas or on projects where architectural heritage is a major consideration.
Aquasett® blocks provide drainage through vertical channels and will allow water through the surface at a rate of approximately 9000mm per hour (9000 litres per m2 per hour). The Inbitex® geotextile beneath the laying course will allow approximately 4500 litres per m2 per hour through and this figure should be used for design purposes.
Key data
| Type | Standard blocks |
| Appearance | Standard |
| Product accreditation | BS EN 1338:2003 |
| Permeability | 9000mm per hour |
| Colours | Pennant, Red brindle, Traditional, Vendage |
| Dimensions (l x w x t) | 150x250x60/80mm |
