Aquaslab® permeable paving is designed for use on non-trafficked pedestrian areas. It can be used in conjunction with either tanked or infiltration systems.
Aquaslab® provides drainage through vertical channels and will allow water through the surface at a rate of approximately 9000mm per hour (9000 litres per m2 per hour). The Inbitex® geotextile beneath the laying course will allow approximately 4500 litres per m2 per hour through and this figure should be used for design purposes.
Aquaslab® provides drainage through vertical channels and will allow water through the surface at a rate of approximately 9000mm per hour (9000 litres per m2 per hour). The Inbitex® geotextile beneath the laying course will allow approximately 4500 litres per m2 per hour through and this figure should be used for design purposes.
Key data
| Type | Flags |
| Appearance | Standard |
| Product accreditation | BS EN 1338:2003 |
| Permeability | 9000mm per hour |
| Colours | Burnt red, Charcoal, Golden brindle, Natural, Red brindle |
| Dimensions (l x w x t) | 300x450x60mm |
